Setlolo sa Silicone Lubricant
BASCI TSEBISO
| Mohlala No. | SLG | Thepa Ntlha | 300 | Tšebeliso | Indasteri ea lijo, kamore ea ho hlapela / ea ho ritela / lisebelisoa tse thibelang metsi joalo-joalo. |
| Che: | maemo | Khoune Ho Kena | 230 | Sephutheloana | 0.5kg/1kg/15kg/18kg/180kg |
| Tšebeliso ea Mocheso | -45 ℃-200 ℃ | Letšoao la khoebo | SKYN | Mmala | Mebala e Fapaneng Khetho |
| Tshebeletso | Tšebeletso ea OEM | Khoutu ea HS | 340319 | Tšimoloho | Shandong, China |
| Mohlala | Mahala | Tlaleho ea Tlhahlobo | MSDS&TECH | MOQ | 5t |
MOSEBETSI
Setlolo sena sa nako e telele sa silicone se nang le mocheso o tlaase, se nang le mafura a mangata a PTFE, se etselitsoe ho lubrication bophelo bohle ba polasetiki le polasetiki, polasetiki (kapa rabara) le likarolo tsa tšepe le li-bearings tse hlakileng bakeng sa ts'ebetso e tlaase ea torque libakeng tse tlaase kapa tse phahameng tsa mocheso. .Ho hanyetsa ka mokhoa o babatsehang, ho hanyetsa oxidation le ho hanyetsa kutu.Sebaka sa mocheso se sebetsang: -45, + 200 ºC.
TS'ELISO
| Ntho | Index ea boleng | Mokhoa oa Teko |
| Ponahalo | Setlolo sa junifomo e tšoeu e feto-fetohang | Tekanyo e bonahalang |
| Khoune ho kenella 1/10mm 25℃ | 350-380 | ASTM D-217 |
| Sebelisa mefuta ea mocheso (℃) | -45-200 | |
| Sehlopha sa NLGI | 2 | ASTM D-217 |
| Boima ba 25 ℃ | 0.98 | ASTM D-1480 |
| Drop Point,℃ | >260℃ | ASTM D-2265 |
| Corrosion(T₂,100℃,24h) | Ho fihlela maemo | ASTM D-4048 |
| Moyafalo(100℃,24h) | <0.1% | ASTM D-972 |
| Karohano ea Oli(100℃,2h)% | <1.7% | FTM 791B,321,2 |
| Ho lahleheloa ke metsi, (40℃,60mm) | Ho fihlela maemo | ASTM D-1264 |
| Thepa ea Khatello e Feteletseng (mokhoa oa libolo tse 'nè)(60Min,1200rpm,392N) | -(75℃) | ASTM |
| Motsotso oa Cryogenic (-40 ℃) | Ho qala -mN.M | ASTM D-1478 |
| Fetola 10min -mN.M | ||
| Fetola metsotso e 60 ------ | ||
| Khanyetso ea oxidation 100h,100 ℃ | 3.4Kpa | ASTM D-942 |
ts'ebetso ea tlhahiso
KOPO
1. E sebelisoa bakeng sa indasteri ea ho lokisa lijo, thepa ea ho hlapela, lisebelisoa tsa ho ritela le ho tiisa metsi, ho tiisa, ho tlotsa li-valve ka lisebelisoa tsa seno sa semela se nolofatsang.
2. Insulation bakeng sa thepa ea ofisi, lisebelisoa tsa motlakase, lisebelisoa tsa likoloi, lisebelisoa tsa motlakase li kopana le lijo le meriana le ho tlotsa le ho tiisa li-valve, likoko le libere.
3. E sebelisoa bakeng sa lubrication pakeng tsa polasetiki, pakeng tsa polasetiki le tšepe, pakeng tsa tšepe.
PHEKO
Melemo e Meholo ea Litlholisano
·Boleng bo botle
·Botumo bo Botle
·Amohela Taelo ea Teko e Nyenyane
·Sephutheloana sa Moralo sa Mahala
· Mohlala oa Fumaneha
Flexible Theko
OEM tšebeletso
Bokhoni ba ho etsa lipatlisiso le nts'etsopele
Tlhaloso ea Sesole
Tšebeletso e nang le Boikarabello
Bokhoni bo boholo ba Tlhahiso
Naha ea tlhaho
Basebetsi ba nang le boiphihlelo
Phano e Potlakile
Tšebelisano ea Nako e telele
·Re na le boiphihlelo ba lilemo tse fetang 10 re le moetsi oa mafura a tlotsang.
·Re etsa sephutheloana joalo ka moralo oa hau kapa lisampole tsa hau ka botlalo.
·Re na le sehlopha se matla sa ho etsa lipatlisiso le ho ntlafatsa ho rarolla mathata a mafura.
·Ho na le barekisi ba bangata ba thepa e tala ho potoloha feme ea rona, re ile ra sebelisana 'moho ka lilemo tse ngata.
· Litaelo tse nyane tsa liteko li ka amoheloa, sampole ea mahala ea fumaneha.
·Theko ea rona e ea utloahala ebile e boloka boleng ba boleng bo holimo bakeng sa bareki bohle.
